tape

10 September 2026

SR5

Emme ZetaPresentation equipment, automatic, automatic, automation, bench, handelbar, building, emme zeta, emmezeta, tape, machine, measure, welding, pocket, mosquito net

Net welding cutting table

The SR5 electronic cutting and welding table is our most advanced model designed for the production of insect screen mesh.

In a single cutting cycle, the 10 mm side strips (for wind-resistant buttons) and the bottom pocket are applied without needing to reposition the mesh.

All programming is easily managed via the touchscreen panel.

The bottom pocket is welded using a thermal welding unit with 3-meter electrodes.

Equipped with two roll holders.

Its speed and ease of use ensure high production output and superior final product quality.

Includes a remote support system and is Industry 4.0 ready.

(Software for integration with the customer’s management system is not included).

Maximum product dimensions: 2.8 x 3 m

Technical information

Maximum length – mm 4650

Maximum depth – mm 4450

Max height – mm 1600

Mains voltage – V 380 5 poles

Absorbed power – Kw 7

Operating pressure – Bar 5/6

Weight – kg 800

For information on prices and delivery times, you can contact us by phone or email with your requests.

21 December 2021

ST4

Emme ZetaProduct emme zeta, tape, blackout, Presentation, roll, welder, welding, pocket, thermal

Manual thermal welder 3 or 4 m

This welding machine model is available in versions with useful welding of 3 or 4 meters.

The machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, all the data necessary for welding.

Using a digital control it was possible to eliminate the door that protects the welding area in order to facilitate visibility during the machining cycle while maintaining the same level of safety.

For the production of mosquito nets, the roll holders for the 50 mm and 10 mm webbing are applied to the welding machine.

In addition to these operations, it is possible to weld the ZIP profile, join fabrics and weld other profiles.

For the production of roller blinds and blackout blinds, an automatic system has recently been added to the welding machine for the execution of a pocket with measures from 3,5 to 10 cm.

The depth of the pocket can be entered directly from the touch-screen without having to manually change anything on the welding machine (optional).

After placing the sheet in position, with a single “START” the complete folding and welding cycle is carried out.

Technical information

Maximum length – mm 3600/4600

Maximum depth – mm 900

Max height – mm 1600

Mains voltage – V 380 5 poles

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 400/500

For information on prices and delivery times, you can contact us by phone or email with your requests.

21 December 2021

ST1500/2000/3000

Emme ZetaProduct bench, tape, macchine, Presentation, roll, welder, welding, techniques, thermal

1.5,2 or 3 m Manual hot welder

The ST is a manual thermal welding machine dedicated to the production of mosquito nets.

The 220 V voltage and low consumption (2 kw) allows this welding machine to be used even in companies with small systems, while maintaining a high level of quality and quantity of welding.

The manual welding machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, the few data necessary to carry out the welding. There are no mechanical timers as they are subject to wear and could lead to reliability problems.

The welding machine is equipped with 1.5, 2 or 3 m and 10 mm wide electrodes.
The fixed support bench is 3 or 4 meters long.
To increase the ease of use, it is possible to have the fixed support bench of 6 meters.

For the production of mosquito nets, it is possible to weld both the pocket on the bottom for the handle bar and the lateral reinforcements for the application of the windproof buttons. To allow this use, the roll holders for the 50 mm and 10 mm tape are applied to the machine.

To facilitate processing, the model with a mobile bench is available.
This version allows you to use the welding machine for the production of customized mosquito nets and in 6 m bars.

Technical information

Maximum length – mm 3000

Maximum depth – mm 550

Max height – mm 1400

Mains voltage – V 220

Absorbed power – Kw 2

Operating pressure – Bar 4/5

Weight – kg 180

For information on prices and delivery times, you can contact us by phone or email with your requests.

21 December 2021

ST3

Emme ZetaProduct emme zeta, tape, blackout, Presentation, roll, welder, welding, pocket, thermal

Manual thermal welder 2 or 3 m

This welding machine model is available in versions with useful welding of 2 or 3 meters.

The machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, all the data necessary for welding.

Using a digital control it was possible to eliminate the door that protects the welding area in order to facilitate visibility during the machining cycle while maintaining the same level of safety.

For the production of mosquito nets, the roll holders for the 50 mm and 10 mm webbing are applied to the welding machine.

For those who need to produce 6-meter bars of mosquito nets, the 3-meter ST3 welding machine can be equipped with a 6-meter mobile support bench. Simultaneously with the progress of the welds, the tape and the cord are automatically inserted.
Using the 3 m welding bars it is possible to obtain an excellent result in a very short time.

For the production of roller blinds and blackout blinds, an automatic system has recently been added to the welding machine for the execution of the lower pocket (cord holder for handle bar). After placing the sheet in position, with a single “START” the complete folding and welding cycle is carried out.

Technical information

Maximum length – mm 3600/4600

Maximum depth – mm 1060

Max height – mm 1600

Mains voltage – V 380 5 poles

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 340/400

For information on prices and delivery times, you can contact us by phone or email with your requests.

21 December 2021

ST6000

Emme ZetaProduct automatic, tape, kit, macchine, measure, Presentation, welding, pocket, mosquito net

Semi-automatic thermal welding machine

The ST6000 is a thermal welding machine (6 m useful welding in two steps) built to weld a 50 mm fiberglass tape pocket on a mosquito net, blackout or other similar materials for the application of the handle bar.

For the production of nets for the KIT (6 m), in addition to the webbing it is also possible to insert the fixing cord and it is possible to insert the handle bar each time that at the end of the cycle will be extracted together with the net.

On request, it is possible to adapt the simultaneous insertion of the box as well.

In this way, at the end of the cycle there will be no other steps to be carried out.

The machine is equipped with an electronic control that allows you to set, via a comfortable touch-screen panel, the few data necessary for processing.

The welding machine can also be used for the production of customized mosquito nets.

Despite the size and the amount of work that this welding machine can carry out, the electrical consumption remains low (only 2 kw).

Being a resistance welding, the machine does not require major maintenance and is inexpensive to maintain.

USE OF THE WELDING MACHINE FOR THE PRODUCTION OF CUSTOMIZED MOSQUITO NETS

USE OF THE WELDING MACHINE FOR THE PRODUCTION OF MOSQUITO NETS IN KIT

Technical information

Maximum length – mm 7100

Maximum depth – mm 730

Max height – mm 1370

Mains voltage – V 380

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 510

For information on prices and delivery times, you can contact us by phone or email with your requests.