Tel: 0039 049 9202276   

ASK FOR A QUOTE

Menu

welder

ST4

, , , , , , , ,

Manual thermal welder 3 or 4 m

ST4
ST4
ST4

This welding machine model is available in versions with useful welding of 3 or 4 meters.

The machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, all the data necessary for welding.

Using a digital control it was possible to eliminate the door that protects the welding area in order to facilitate visibility during the machining cycle while maintaining the same level of safety.

For the production of mosquito nets, the roll holders for the 50 mm and 10 mm webbing are applied to the welding machine.

In addition to these operations, it is possible to weld the ZIP profile, join fabrics and weld other profiles.

For the production of roller blinds and blackout blinds, an automatic system has recently been added to the welding machine for the execution of a pocket with measures from 3,5 to 10 cm.

The depth of the pocket can be entered directly from the touch-screen without having to manually change anything on the welding machine (optional).

After placing the sheet in position, with a single “START” the complete folding and welding cycle is carried out.

 

Technical information

Maximum length – mm 3600/4600

Maximum depth – mm 900

Max height – mm 1600

Mains voltage – V 380 5 poles

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 400/500

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

ST1S200

, , , , , , , ,

Manual thermal welder 1,5 m

ST1S200
ST1S200
ST1S200

The ST1S200 is a manual thermal welding machine dedicated to the production of mosquito nets.

The 220 V voltage and low consumption (2 kw) allows this welding machine to be used even in companies with small systems, while maintaining a high level of quality and quantity of welding.

The manual welding machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, the few data necessary to carry out the welding. There are no mechanical timers as they are subject to wear and could lead to reliability problems.

The welding machine is equipped with 1,5 m and 10 mm wide electrodes.
The fixed support bench is 3 meters long.
To increase the ease of use, it is possible to have the fixed support bench of 6 meters.

For the production of mosquito nets, it is possible to weld both the pocket on the bottom for the handle bar and the lateral reinforcements for the application of the windproof buttons. To allow this use, the roll holders for the 50 mm and 10 mm tape are applied to the machine.

To facilitate processing, the model with a mobile bench is available.
This version allows you to use the welding machine for the production of customized mosquito nets and in 6 m bars.

 

 

Technical information

Maximum length – mm 3000

Maximum depth – mm 550

Max height – mm 1400

Mains voltage – V 220

Absorbed power – Kw 2

Operating pressure – Bar 4/5

Weight – kg 180

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

ST3

, , , , , , , ,

Manual thermal welder 2 or 3 m

ST3
ST3
ST3

This welding machine model is available in versions with useful welding of 2 or 3 meters.

The machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, all the data necessary for welding.

Using a digital control it was possible to eliminate the door that protects the welding area in order to facilitate visibility during the machining cycle while maintaining the same level of safety.

For the production of mosquito nets, the roll holders for the 50 mm and 10 mm webbing are applied to the welding machine.

For those who need to produce 6-meter bars of mosquito nets, the 3-meter ST3 welding machine can be equipped with a 6-meter mobile support bench. Simultaneously with the progress of the welds, the tape and the cord are automatically inserted.
Using the 3 m welding bars it is possible to obtain an excellent result in a very short time.

For the production of roller blinds and blackout blinds, an automatic system has recently been added to the welding machine for the execution of the lower pocket (cord holder for handle bar). After placing the sheet in position, with a single “START” the complete folding and welding cycle is carried out.

 

Technical information

Maximum length – mm 3600/4600

Maximum depth – mm 1060

Max height – mm 1600

Mains voltage – V 380 5 poles

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 340/400

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

LVM1 – Semiautomatic work station for vertical blinds.

, , , , , , , ,

Description

The LVM1 is a semi-automatic cutting and welding station for resinated vertical curtains.

The machine is equipped with electronic control which allows you to set up, by means of a touch-screen panel, the few data needed for welding and measuring the two testheads of the tent.
It is also possible to insert light tolerance to the floor. In this way it is enough to enter the ceiling height measurement to automatically obtain the band width calculation.

The discharge bench is equipped with a pneumatic clamp for automatic pulling of the tent.

By adding the heat mold (optional) you can mark the soft fabric that will then be sewn.

Upon request, it is possible to install the program for cutting of inclined curtains (optional) with which, after inserting the few necessary data, the program will calculate independently the number of bands and length.

The structure is completely made of annodised structural aluminum profiles.
The drive carriage is mounted on tempered and chrome steel guides to ensure speed and precision.

 

 

Technical information

With these dimensions it is possible to produce curtains of 4 mt.
However, it is possible to vary all the measures in order to obtain the most suitable machinery for every need.

 

MAXIMUM LENGTH – mm 4900
MAXIMUM WIDTH – mm 750
MAX HEIGHT – mm 1350
WEIGHT – kg 200
ABSORBED POWER – kw 1
VOLTAGE – Volt 220
PNEUMATIC PRESSURE – bar 5/6

For price information and delivery times you can contact us by telephone or by mail with your requests.

LV3 – Automatic work station for resinated vertical blinds.

, , , , , , , , , , ,

Description

The LV3 is a cutting, bending and welding station for the production of resinous vertical curtains.

The machine is equipped with a loader for the winches, during the cycle will be automatically inserted.

The double clamp allows you to optimize production times. As a trolley keeps the curtain in tension to the desired size, the other carriage returns to the waiting position near the cutting point.

The machine is equipped with a PLC control that allows it to operate safely by combining ease of use and productivity thanks to the insertion of all data via a touch-screen panel.

All measurement and welding data are intuitive and easy to understand.

On request it is possible to install the program for the calculation of curtains for sloping ceiling.
By entering a few data the machine will automatically calculate the number of bands to cut and length.

 

 

Technical information

With these dimensions it is possible to produce curtains of 4 mt.
However, it is possible to vary all the measures in order to obtain the most suitable machinery for every need.

 

MAXIMUM LENGTH – mm 6150
MAXIMUM WIDTH – mm 600
MAX HEIGHT – mm 1400
WEIGHT – kg 490
ABSORBED POWER – kw 1
VOLTAGE – Volt 220
PNEUMATIC PRESSURE – bar 5/6
PRODUCTIVITY AVARAGE – pieces/h 200

 

For price information and delivery times you can contact us by telephone or by mail with your requests.